|
Post by Christopher Irwin on Oct 30, 2017 13:05:50 GMT 1
How do I take out a starter from my 1988 650cc NTV Revere honda
|
|
|
Post by chaz on Oct 31, 2017 5:37:08 GMT 1
Hi Chris
Starter motor removal.
1/ Remove the seat & side panels. Disconnect the battery negative.
2/ Note that it is advisable to remove the fuel tank & the rear cylinder exhaust pipe for improved access.
3/ Peel back the rubber cover & unscrew the nut securing the starter cable to the motor.
4/ Unscrew the two bolts securing the starter motor to the crankcase. Note the earth cable secured by the front mounting bolt.
5/ Slide the starter motor out from the crankcase & remove it from the left-hand side of the machine.
6/ Remove the O-ring on the end of the starter motor & discard it as a new one must be used.
Hope this helps, Chaz
|
|