|
Post by mark on Nov 8, 2015 19:35:59 GMT 1
i have a ntv600 k i have a coolent leak where the metal pipe conects to the water pump housing were can i get a seal from for it as when i bought the bike it was bodge up with silicon
|
|
brendan0
Rides on the Motorways
Posts: 86
|
Post by brendan0 on Nov 9, 2015 14:07:11 GMT 1
Hi Mark
Probably David Silver or Wemoto are easiest. If you can find out tesize, you can probably get it much cheaper from an industrialsupplier, or from a big box of orings that you may already have...but I'd go lazy and go David Silver if you can't be bothered researching!
Good luck
|
|
jack
'Theory' rider
Posts: 15
|
Post by jack on Nov 10, 2015 22:24:38 GMT 1
|
|