|
Post by joe65 on Sept 16, 2014 20:10:26 GMT 1
Hi everybody, just to let you know I'm new so please bear with me, I have a 1995 ntv650P and I am looking to replace the original collector box and silencer with a Motad silencer as at my age I don't think I will get my moneys worth out of buying a Honda replacement , the problem I have is I can not figure out where the centre stand rubber stop will go when I remove the collector box as on my bike this is where it is placed. Any thoughts or advice will be truly welcomed. Regards Joe
|
|
honeymonster
A-Road rider Limited to 70
Now a 2 bike household :-)
Posts: 81
|
Post by honeymonster on Sept 18, 2014 0:35:05 GMT 1
Hi Joe, Welcome to the Forum.
To answer your question, the motad comes with a bracket you bolt on to the frame, or if you chose a Delkivic they have a bracket on the collecter pipe.
Personally I'd go with the Delkivic, For starters they're a lot cheaper and they sound better (if my Pan is anything to go by)
HTH Andi
|
|
|
Post by joe65 on Sept 18, 2014 17:07:31 GMT 1
many thanks Andy I will have a look at that.
|
|
|
Post by De Graaf van Salland on Sept 19, 2014 13:24:47 GMT 1
Or have a look here: linkGvS
|
|
|
Post by motaduk on Sept 23, 2014 15:28:29 GMT 1
Hi Joe, Welcome to the Forum. To answer your question, the motad comes with a bracket you bolt on to the frame, or if you chose a Delkivic they have a bracket on the collecter pipe. Personally I'd go with the Delkivic, For starters they're a lot cheaper and they sound better (if my Pan is anything to go by) HTH Andi My view is biased of course- but I think the Motad has the advantages of being made in the UK- Chinese labour rates are lower but having a British produced product is worth a little extra all of our stuff is properly developed and tested to uk and euro standards- quite often you can "get away" with noisy stuff but its nice not to have that worry the stand stop is mounted on the l hand side as this is neater and works well email me on iamcdonald@motad.co.uk and I will see if we have an ex display or test system we could help you with
|
|
rob
Ahh! Just passed their bike test
Posts: 28
|
Post by rob on Sept 30, 2014 10:21:35 GMT 1
Just like to second what motaduk says. You know where you are with a Motad.
|
|