|
Post by Sam on Jul 15, 2014 23:28:50 GMT 1
My dad and I are replacing the engine in his NTV600 and we cannot get the bolt removed from the front engine mount. Any tips, tricks we are missing. Its rusted solid! Thanks.
|
|
|
Post by toysoldier on Jul 25, 2014 5:38:45 GMT 1
there have been some horror storys wear the block has to be cut to remove it
|
|
undercover
All Weather Rider, well hard
Posts: 186
|
Post by undercover on Jul 29, 2014 14:53:35 GMT 1
Don't mess it up get professional help I had too when I tried to loosen the exhaust studs. That was a simple job to put the centre stand on.
The bolt will have to be drilled out Use small drill bits then first.
I would get someone cheap to do it get a quote from a mechanic
|
|