|
Post by Phoenixx on Jan 10, 2014 13:19:59 GMT 1
I'm sure a fair amount of you probably hate the huge standard indicators, me included. Which is why I want to change them. Could anybody that has done this before please point me in the right direction with fork mounted indicators, and also with the rears. My concern with the rear indicators is when I take the standard ones off, there is going to be a big hole left in place of them! Has anyone got a solution for this? Also is anyone knows of cheap-ish belly pans could they please let me know Thankies people
|
|
deedee
Bad ass biker
Posts: 338
|
Post by deedee on Jan 11, 2014 6:49:56 GMT 1
I've come across a few 'reasonably' auctioned bolt on second hand belly pans on eBay. Search under 'Bros'. (Belly pans listed for NTV/Revere tend to bid up quite a bit higher.) Cheapest I recall a 'Buy It Now' for a Bros belly pan was £30, don't recall p&p, but it wasn't outrageous. (As I remember it was untidy, scratched, but not cracked & came complete with fittings... Needed TLC!) They do come up from time to time... BUT rarely! Good luck, 'if' I come across any; I'll post it... .
|
|
|
Post by Phoenixx on Jan 11, 2014 8:57:21 GMT 1
Thanks, I'll check it out
|
|
|
Post by Buzzin (^_^) on Jan 11, 2014 9:11:32 GMT 1
Front: I bought mine with small indicators fitted. They are simply mounted on the headlight mounting brackets, in the first hole (the largest) using some washers and a bit of rubber. Works fine.
Rear: You can buy little plastic plates that cover the large shape the old indicators use so it doesn't look horrible. I bought them for around 2 euro's at a british shop.
|
|
slug
Bad ass biker
biker from welsh borders on a budget***
Posts: 235
|
Post by slug on Jan 11, 2014 9:19:26 GMT 1
hi. I brought a set of mini indicators before to fit on my ntv (now sold,,) for rear . they fitted ok but did not like the like the look of them. was worried about the visibility of them.. went back to original large original type. with holes that's no problem just fit large washers each side of indicators.. you can fit led indicators, but think you need inline ballast resistors, for each indicator,, some other lads have fitted different indicators,, may be they can give you more advice.. still have mini rears if you want for free just pay postage..
|
|
|
Post by Phoenixx on Jan 12, 2014 15:42:37 GMT 1
Thanks guys I thought about mounting them on the headlight bracket, but I wasn't so keen on having them that high up. Ideally I'd like them to attach to the forks still. Thankyou slug, but I think I'd like some a little different to that. But if I change my mind I'll let you know
|
|