Good condition fork stanchions.

[Deleted]

My forks are really pitted and so the fork seals go very quickly. I don't really want to spend £200 on some brand new ones but desperately need a replacement pair. I'm hoping that there's someone with a couple in good condition that I could purchase.

Thanks in advance
Josh

[striderider]

You in luck my friend; I've a complete front end taken from a Revere-M.

I'm also heading up to Brum-land on the 17th of this month (On route to BMF in Peterborough).

I'd like to sell it complete...

There is everything, including:

- Pair of forks with 300-500 miles from new seals & oil in very good condition, one small pit mark near the top (but not within the travel of the lower stanchions). I started to attempt a mirror polish on them, but got bored & achy fingers.

- Yokes: Bottom from the original '92 Revere, top from a NTV650 (I've rattle canned this black) - so you can use 'dirty' bars if you wish. Spindle is in usable condition & is still pressed into the bottom yoke, taper bearings still present.

- The front mudguard can use some work, but is usable - has a fender extender riveted on.

- Front wheel has some battle scars, nothing a bit of sanding & re-painted won't fix

- Tyre is a 110/80/17 Avon Roadrider with about 2/3rds tread left, holding good pressure (has been sat for 6 months & only dropped 2psi)

- Complete braking system, also has a stainless braided 'HEL' line which is 6" longer than standard - handy if you wanna change your bars. The caliper pistons move freely & passed MOT . I'd probably replace the pads though, they've been handled with greasy mitts.

- Oh, yes..A big, new, shiny stainless top-nut

[Deleted]

Thanks for the reply, this is just about perfect

How much are you looking to get for the set then? and do you mean you'll be able to bring it all when you come to Birmingham?

[striderider]

If I get my journey timings right I can drop it off to you in Birmingham either on Fri 17th or Sun 19th.

Pm sent