sear
Bad ass biker
Posts: 302
|
Post by sear on Jan 22, 2013 21:33:29 GMT 1
hi everyone,
I have a bit of a project on the go and I was hoping to experiment a little with a revere carb, they just happen to have the right dimensions and inlet spigot size for a build I'm working on and would really like to try one out, so anyone got a spare?
Thanks!
|
|
norfolknchance
Sheene Gold rider. Nuff said
15967 mile & climbing
Posts: 783
|
Post by norfolknchance on Jan 22, 2013 22:14:39 GMT 1
600 or 650
|
|
sear
Bad ass biker
Posts: 302
|
Post by sear on Jan 23, 2013 0:00:51 GMT 1
either, will probably need to rejet anyway and the inlet spigots are the same on both (I think!)
|
|
|
Post by McF on Jan 26, 2013 11:01:11 GMT 1
either, will probably need to rejet anyway and the inlet spigots are the same on both (I think!) Sorry, they're different which is why Norfolk asked: 600 = 34.0mm 650 = 36.5mm
|
|
sear
Bad ass biker
Posts: 302
|
Post by sear on Jan 26, 2013 11:08:21 GMT 1
Oh right that's a surprise, are they both a 39mm external diameter? The 34mm ID would be more appropriate so a 600 carb it is then, sorry about that.
|
|
norfolknchance
Sheene Gold rider. Nuff said
15967 mile & climbing
Posts: 783
|
Post by norfolknchance on Jan 26, 2013 23:08:08 GMT 1
airbox inlet is the same size............. i know that only coz im running a 600 revere airbox on the vile
inlet manifold side is different
|
|