|
|
Post by Phoenixx on Nov 7, 2012 13:22:59 GMT 1
Hi all... Don't know how my NTV doesn't have one, but it doesn't for some reason. I need the rubber bit that sits inside the cap of the front brake master cylinder. If anyone has one kicking about, it would be helpful... Will give a coupl'a quids  Found one on wemoto but it included the cap aswell... Thought £15 was a bit much for a bit of rubber. But if nobody here has one I'll have no choice. The bloody thing leaks everywhere -.- Thanks!  |
|
jup
Restricted to 33BHP
Posts: 67
|
Post by jup on Nov 8, 2012 15:31:38 GMT 1
Hmmmm, I may have one of these. Won't be able to check until Friday evening though. I'll let you know asap.
|
|
|
|
Post by Phoenixx on Nov 8, 2012 16:29:41 GMT 1
Ah, thanks I decided to bit the bullet and pay £15 for one though -.- I noticed it dripping out the top today after a few corners :S Thought I better get one pretty sharpish... |
|
pikey
Bad ass biker
Posts: 342
|
Post by pikey on Nov 8, 2012 19:15:41 GMT 1
AND without the diaphragm you do run the risk of brake pistons not returning / brake drag too.  |
|
|
|
Post by Phoenixx on Nov 8, 2012 21:49:03 GMT 1
Ah, probably a good thing I bought one then... Lets hope the post comes quick!
|
|
jup
Restricted to 33BHP
Posts: 67
|
Post by jup on Nov 10, 2012 22:11:35 GMT 1
Glad you ordered one. The one I have is stuck under the cap. The screws are FUBAR, gonna take some drilling if I want to get at it!!!
|
|
|
|
Post by Phoenixx on Nov 22, 2012 13:24:59 GMT 1
Oh dear, never good when the drill comes out... The front mudguard on mine has all the bolt heads snapped off... Not looking forward to drilling that one  Good luck! |
|
Good luck!