|
|
Post by chris on Apr 3, 2012 17:59:27 GMT 1
Hi all hope someone can help.
Got my self a 89 revere or ntv 600 not sure on the diffrance.
I have the bike in bits just now getting ready to spray the frame (first bike not passed my test yet), so trying to get together bits im missing.
The main bit just now is a right hand side plastic that fits under the seat and follows on to the rear plastic. Not bothered about colour as will be painting anyway.
thanks chris.
|
|
|
|
Post by rj2para (Bisto) on Apr 3, 2012 18:21:33 GMT 1
First welcome to the club Chris. Better to sign in than post as guest. Right hand panels are in short supply but they do come up from time to time on ebay. £70 new from Mr Honda  I bought my pair for £30 on ebay but you will need patience. Good luck with your rebuild. Why not login and start a project post. |
|
|
|
Post by avaraeside on Apr 3, 2012 23:08:55 GMT 1
Thanks, thats me registered.
Yes mr honda does'nt have a problem lightining our pockets lol. Ebay is where I got the left and back plastic, will just keep my eye open.
Thanks chris
|
|
|
|
Post by rj2para (Bisto) on Apr 4, 2012 7:51:44 GMT 1
Welcome Mr avaraeside  Good to have you as a full member. |
|
|
|
Post by skyhook on Apr 4, 2012 8:37:14 GMT 1
Welcome to the forum Mr Avaraeside, hope you get as much fun from the forum as most of us do.
|
|
|
|
Post by thatsawkward on Apr 4, 2012 9:00:08 GMT 1
May have side plastics, will check and post pics at weekend when I'm back...
|
|
|
|
Post by avaraeside on Apr 4, 2012 22:32:53 GMT 1
That would be great thanks.
|
|
|
|
Post by raywallum on Apr 6, 2012 23:29:01 GMT 1
I have a right sidepanel - but it has a small crack near the top corner
It is gray colour (primer?)
I can take a photo tommorow!
If it is any use you can have it for the cost of posting
|
|
|
|
Post by avaraeside on Apr 7, 2012 12:00:39 GMT 1
That would be great thanks, I will take that offer.
|
|
|
|
Post by avaraeside on Apr 13, 2012 19:29:36 GMT 1
Can anyone help me out please. Any of the two offers above would be great.
|
|
|
|
Post by rj2para (Bisto) on Apr 13, 2012 20:30:27 GMT 1
Well done avaraeside you are now upto 8 posts. No rush for the panels, lets get your bike built first, then we can start with the finishing touches.
You never know, you may get lucky and spot one you like on ebay.
How is you build going, how about some photo's?
|
|
groovylee
Sheene Gold rider. Nuff said
Member of the QA team
Posts: 648
|
Post by groovylee on Apr 13, 2012 20:57:48 GMT 1
i have one that's a bit rough. the only downside is that the large 'lug' that slots into the rear seat plastics is snapped off. i still have it. it would def need painting though. if you can do anything with it, it's yours for the postage cost. pm me the address and i'll see how much the postage is ;D
Lee
|
|
|
|
Post by avaraeside on Apr 14, 2012 11:55:14 GMT 1
I know bisto but at the min my long term project is looking less long term. Hoping to have the wireing and engine back in by next weekend, and swing arm fitted, got all my seals and bearing for it from honda the other day. Will try get some pics up in the project section later today. Not really botherd about the panel condition , I have decided to get the tank and panels wraped.
|
|
groovylee
Sheene Gold rider. Nuff said
Member of the QA team
Posts: 648
|
Post by groovylee on Apr 14, 2012 13:28:54 GMT 1
i've managed to plastic weld the lug back on, so it's now complete. let me know if you want it ;D
|
|
groovylee
Sheene Gold rider. Nuff said
Member of the QA team
Posts: 648
|
Post by groovylee on Apr 14, 2012 14:27:59 GMT 1
|
|
