ED-CASE
All Weather Rider, well hard
Posts: 172
|
Post by ED-CASE on Jul 1, 2010 19:04:12 GMT 1
Hi, folks Does anyone know where I can buy the " Honda service tool, part number 07908-ME90000 " I need this to undo the swing-arm lock-nut so I can sort the swing-arm bearings. If I have to, I will make one, but I would rather buy the real thing, if I can I tried keying in the description above, and shortened versions, on the 'net. No result. Any suggestions would be gratefully received All the best Ed
|
|
|
Post by yellowmelos on Jul 1, 2010 19:44:16 GMT 1
you can get them from Fowlers in bristol, just give them the part number only.. as Honda will only sell these to dealers... but if you just tell them the the part number they will order it for you ( will take a couple of weeks ) cost £27
|
|
|
Post by rj2para (Bisto) on Jul 1, 2010 21:00:36 GMT 1
|
|
|
Post by smartiedarkblue on Jul 2, 2010 20:23:34 GMT 1
go on ebay, i got mine from there 15quid, type in 'swing arm removal tool' or similar and there is bloke there who hand makes them for all bikes,
Just confirm the diameter of the nut and he will make it.
ed
|
|
ED-CASE
All Weather Rider, well hard
Posts: 172
|
Post by ED-CASE on Jul 2, 2010 23:24:34 GMT 1
Went on ebay. Very prompt, helpful, reply. Just confirmed nut size. looks good. Many thanks to all. All the best, from Ed. Gordon in Plymouth, England
|
|