Post by ronnstoppable on Jun 9, 2022 19:08:35 GMT 1
used to own a 86 hawk but jumped the pond and picked up a ntv650 Rc33E.
Looking to jet the bike, put foam individual intakes, jet kit, and exhaust with timing advanced from hord. plus maybe mechanical pump and other toys.
does anyone have any advice that's revere specific for jetting/tuning ?
I know there is a very nice write up for the Hawk in terms of jetting, i used it for my old hawk, but I'm a bit hesitant as there really isn't much info i can find about it.
I'm going to start buy using the recommendations here, www.hawkgtforum.com/forum/honda-hawk-gt-bros-discussions/mechanical-and-technical/how-to-s/18189-jetting-database
its the same setup on the hawks so i would assume parts are interchangeable.
please correct me if I'm wrong.
thanks.
Looking to jet the bike, put foam individual intakes, jet kit, and exhaust with timing advanced from hord. plus maybe mechanical pump and other toys.
does anyone have any advice that's revere specific for jetting/tuning ?
I know there is a very nice write up for the Hawk in terms of jetting, i used it for my old hawk, but I'm a bit hesitant as there really isn't much info i can find about it.
I'm going to start buy using the recommendations here, www.hawkgtforum.com/forum/honda-hawk-gt-bros-discussions/mechanical-and-technical/how-to-s/18189-jetting-database
its the same setup on the hawks so i would assume parts are interchangeable.
please correct me if I'm wrong.
thanks.