Hold on...handlebars...steel or alloy

[exkbbs]

As a giant biker (1,65 m / 5 foot 5) with about 30 owned bikes and driven many many more,  i know the feel of the handlebars.

Also the ones from the very first "92 NTV 650 revere i bought yesterday. The two bolt on one-piece aloy left and right handlebar struts are kinda narrow angles to much inside for me.

As far i can find there are 3 kinds of handle bars...(1)The bolt on set i have, it bolts to the upper clamp (2) a sort alike setup that clamps to the upperpart of the innertubes of the front fork, clip-on style, but raised and(3) another upperclamp with a set of normal steel tube handlebars.

This set (3) is what i'm looking for my Revere, but i dont know if i just can swap the upper clamps?

anybody who Knows, or can tell me what bar on what bike?

Regards Bert

[Buzzin (^_^)]

If I remember correctly, the Revere has a different upper clamp between the two forks, so you can't just bolt on a NTV style 'normal' handle bar.
You might be able to mount the clipons though...but you might have to let the forks stick through a bit more.
Those were, again, if I am not mistaken, only used on the Bros.
The main reason you can't mount a normal handlebar clamp on the Revere, is that the fusebox is in the place where you would do so.
Some people have made the conversion though, but they had to put the fuses somewhere else....