|
Post by noakira on Feb 15, 2012 11:01:21 GMT 1
|
|
|
Post by noakira on Feb 18, 2012 20:27:08 GMT 1
Just for the record..... In the UK its called a "Rotor Puller" The correct size for the Revere 600 engine is 22mm x 1.5 thread. Got a tool off ebay for £12 squid. www.ebay.co.uk/itm/ROTOR-PULLER-M....#ht_1847wt_1398Unfortunately cant find a cheap bolt of this size (22mm x 1.5) and my usual box of tricks in the corner of the garage is drawing a blank. If anybody can think where they've seen a bolt of this size ?
|
|
|
Post by rj2para (Bisto) on Feb 18, 2012 22:48:15 GMT 1
|
|
|
Post by noakira on Feb 19, 2012 10:11:30 GMT 1
Yeah that's the one...... winging its way in the post to me. Delivery 27th Feb ! FAST POST ( I'm hopeing this is a misprint ) Couldn't locate a stubby 22mm x 1.5 bolt on the net / Garage. If anybody can think of where they've seen a bolt of this type on something that can be borrowed for a few minutes.... i'm all ears ! Noticed there is some big blobs of locking gunk on the inner thread of the flywheel so i'm kinda thinking its gonna be a bit of a biatch to get off. The tool seller says words to this effect in his instructions. "Slight turn, dirty great big hit with lump hammer, slight turn, another twang, turn, twang, twang, twang, Aaarrrghhh! "
|
|
|
Post by noakira on Feb 19, 2012 10:50:30 GMT 1
|
|
|
Post by noakira on Feb 25, 2012 22:29:29 GMT 1
Got and it works, pulls the rotor off cleanly. So an alternative bolt would have to be this size = 22 x 1.5
very nice high build quality for not too expensive a tool
|
|