sear
Bad ass biker
Posts: 302
|
Post by sear on Jan 21, 2012 22:49:35 GMT 1
Hi everyone,
Just about to order a braided front hose for my 600 revere, WEMOTO have them for sale under NTV650 but NOT NTV600, I'm fairly sure they'll be the same length and fitting? But I'm suspicious and would appreciate some input!
So, can I order hoses being sold as for a 650?
Thanks, Dan
|
|
|
Post by rj2para (Bisto) on Jan 21, 2012 23:07:45 GMT 1
Happy to be corrected, but my gut feel would be no; as I think the bar heights are different.
Thoughts all?
|
|
sear
Bad ass biker
Posts: 302
|
Post by sear on Jan 21, 2012 23:11:31 GMT 1
Well, I know the bar setup is slightly different but there isn't a huge different in height, if anything the NTV650 bars being slightly higher, so surely they would be ok? Or is there a huge difference? My finger is hovering above the buy button on the hel website
|
|
|
Post by De Graaf van Salland on Jan 22, 2012 8:58:23 GMT 1
|
|
sear
Bad ass biker
Posts: 302
|
Post by sear on Jan 22, 2012 23:35:59 GMT 1
Great, thanks for that, It lists the Part number for the NTV650 and 600 as this: 45126MS9752 As does a few other websites on googling, so should be fine!
I'll give this thread another day, just in case, before I order the HEL lines, but I think i'm going to go ahead.
Quite like the look of the plain silver banjo with the 'carbon' look hose, not for the carbon look, just gunmetal grey and plain silver look quite good I think.
Can't wait to get it, nothing better than good engineering!
Thanks everyone, Dan
|
|
|
Post by McF on Jan 22, 2012 23:50:10 GMT 1
I'm pretty confident they should be OK the main area to worry about are the throttle cables You won't regret the choice of going for braided hose, especially on the front
|
|
sear
Bad ass biker
Posts: 302
|
Post by sear on Jan 23, 2012 0:03:19 GMT 1
Wicked, Ill get them ordered.
It has actually got braided hoses on already (on the front) but they've split and pee a little bit of fluid out everytime you apply a fair amount of pressure to the front brake. Nice surprise! Could've easily missed it as well.
Dan
|
|
|
Post by thatsawkward on Jan 23, 2012 9:22:54 GMT 1
Sorry, late reply and probably too late... just measured NTV650 and 600 Revere braided front lines - both exactly the same measurement (got both in the garage). I'm fitting NT650V front lines as I have raised the bars on my Revere - the Deauville lines give me an extra couple of inches...
|
|
|
Post by McF on Jan 23, 2012 9:38:08 GMT 1
the Deauville lines give me an extra couple of inches... I have seen adverts for these services. I didn't know the process worked on brake lines too
|
|
|
Post by thatsawkward on Jan 23, 2012 14:17:13 GMT 1
I have seen adverts for these services. I didn't know the process worked on brake lines too I'll give anything a go... always worthing checking your junk mail from time to time - one of them has to be a winner.....
|
|
|
Post by Buzzin (^_^) on Jan 23, 2012 22:52:08 GMT 1
Again: late reply.....they fit I ordered NTV650 ones for mine and they fit the Revere just fine....changed the braking quite a bit. (in a positive way)
|
|