bozboz
Hits the TON !
Posts: 115
|
Post by bozboz on Jul 15, 2011 20:22:15 GMT 1
I have a skidmarx twin headlight sport touring fairing for sale. It needs rubbing down and some minor fibreglass repairs. Has scratches and a couple of the alu grills ahve holes in them. Complete with side panels, bellypan, top cowling, screen, lights, fittings, indys and black screen.
I'm open to offers, collection only...
Also I have a seat with no rips that got raised slightly for comfort.
PLus side panels, rear tailpiece, front headlight cowl and powdercoated rear wheel(can give you the set but I'd want your front in exchange). Open to offers...
all off a 95 ntv650.
|
|
|
|
Post by Buzzin (^_^) on Jul 15, 2011 21:47:36 GMT 1
trying to help: things always sell better with pictures  |
|
bozboz
Hits the TON !
Posts: 115
|
Post by bozboz on Jul 15, 2011 22:59:52 GMT 1
|
|
wolfy
Bad ass biker
Posts: 286
|
Post by wolfy on Jul 16, 2011 15:28:07 GMT 1
Will the seat fit the revere? I have a feeling it probably will, they look the same but I don't know if the fixings are the same if not. Also what colour is it?
|
|
|
|
Post by rj2para (Bisto) on Jul 16, 2011 16:31:14 GMT 1
Cheers for the pointer to the pictures. The picture does show it is a nice shaped fairing. .. How many beer token's are you after Boz? Where do you live ? for shipping / collection? Scotland? Cornwall? London? |
|
|
|
Post by oddjob1 on Jul 16, 2011 17:57:33 GMT 1
almost tempted to buy my old fairing back lol think he down in kent area
|
|
|
|
Post by rj2para (Bisto) on Jul 16, 2011 18:07:23 GMT 1
Cheers odddjob. I was down that way the other week as well. Suspect it would be a good buy, if you are down that way and can collect. Thanks again. Rj
|
|
bozboz
Hits the TON !
Posts: 115
|
Post by bozboz on Jul 17, 2011 12:52:54 GMT 1
wolfy PM'd It is indeed oddjobs old one ;D served its purpose well!...Good fairing but does need some attention. A good weekend of sanding back and painting and getting a small fibreglass kit from halfrauds. I'm In Eynsford which is a small village just off the m25(Jct 3). Collection only really too much to post. Not sure really I'd be happy with 50 that makes it still a good buy even with the work it needs... BEFORE I FORGET: You will need to remove the bolt hole at the front of the headstock for this fairing to fit. THis is only needed I think fot the ugly and non existent honda fairng to fit onto. A few seconds with the grinder does the job. I have got pictures I made took at the time for the fitting of the fairing which will help!
|
|
|
|
Post by Buzzin (^_^) on Jul 17, 2011 17:11:58 GMT 1
Will the seat fit the revere? I have a feeling it probably will, they look the same but I don't know if the fixings are the same if not. Also what colour is it? The revere and NTV seat are one and the same, so don't worry about the fit. |
|
