devlin86
Rides on the Motorways
Posts: 99
|
Post by devlin86 on Mar 4, 2010 17:44:07 GMT 1
What i am proposing to sell here is my Stainless steel motad exhaust, i will be replacing it with a micron one, these normally retail for 150 pounds on ebay, but mine has a few minor bemishes, so i wouldn't be looking at such a figure, all said, my motad exhaust is in very good useable condition and cleans up nicely.
I will keep it if it doesn't sell, as i'm contemplating leaving the micron can i hae purchased for another bike, but if i get a decent offer i will probably use the funds to go ahead and have it welded in place, what i would propose is that the possible buyer and i could make a deal, as i could use a old link pipe from a possibly abused revere exhaust to make a link pipe to fit my micron (once welded would probably be suitable)
|
|
devlin86
Rides on the Motorways
Posts: 99
|
Post by devlin86 on Mar 4, 2010 17:44:28 GMT 1
|
|
paulie73
Bad ass biker
Still loving the NTV's
Posts: 208
|
Post by paulie73 on Mar 4, 2010 19:07:40 GMT 1
How much are you thinking for the Motad? Mine is almost goosed.
|
|
|
Post by McF on Mar 4, 2010 19:10:31 GMT 1
What i am proposing to sell here is my Stainless steel motad exhaust The eBay link looks nice, have you got a photo of yours? Perhaps even fitted to aNTy
|
|
devlin86
Rides on the Motorways
Posts: 99
|
Post by devlin86 on Mar 4, 2010 19:12:24 GMT 1
Its the exact one i have, i could put up a picture where it can be seen, i just tried my hand at taking it off the bike, i think the previous owner used some kind of gasket seal, as its not going to budge!
Its not perfect, its got a few little dents on it, and a scratch or two, im not into wrongful advertising, but being that its stainless steel, it'll outlast most of us'
|
|
devlin86
Rides on the Motorways
Posts: 99
|
Post by devlin86 on Mar 4, 2010 19:15:05 GMT 1
i'll put a link to picture from facebook, from when i first got her last year Nov'
|
|
devlin86
Rides on the Motorways
Posts: 99
|
Post by devlin86 on Mar 4, 2010 19:15:44 GMT 1
|
|
devlin86
Rides on the Motorways
Posts: 99
|
Post by devlin86 on Mar 4, 2010 19:17:19 GMT 1
You may have to add me, i'm starting to wonder if its more hassle then its worth; considering maybe keeping hold of the micron until i get my next bike (hopefully a thundercat/cbr-f) then AuNTy will be made into the second bike, shopping hack!
|
|