|
Post by rj2para (Bisto) on May 2, 2010 18:14:54 GMT 1
|
|
|
Post by De Graaf van Salland on May 2, 2010 18:33:53 GMT 1
And this one still has it's right-hand side panel ;D
|
|
|
Post by rj2para (Bisto) on May 2, 2010 20:11:43 GMT 1
Not for long. I suspect it will be the first thing he sells.
I could do with a spare headlamp frame but I suspect he does not have this with the added faring.
I am watching it though to see how he splits her down.
|
|
|
Post by smartiedarkblue on May 6, 2010 15:11:34 GMT 1
hi all
i have had rear fairing, LH fairing panel, Fuel tank, And whole front fairing and twin headlamps off this.
Sorry
ed
|
|
|
Post by blitzman5 on May 8, 2010 0:47:35 GMT 1
HI ALL Iv just taken the seat and the rack off this bike ;D
|
|
|
Post by rj2para (Bisto) on May 8, 2010 6:36:53 GMT 1
Pleased you have found some bits. smartiedarkblue are you converting your bike to twin lights? Or upgrading the ones you have? Just that I still need to weld my headlamp frame and wondered if the twin system bolts to the existing frame or if that needs to be changed as well? What's the plan with the seat Blitzman5, are you replacing yours or do you plan to have two and customise one of them? Have you told the seller about the forum? If you both find him good to trade with; then he could list what he has left on here as he does not seem to put much detail on ebay.
|
|
|
Post by blitzman5 on May 8, 2010 17:30:46 GMT 1
im going to us the seat as mine is beyond repair unless you recover no havent told them but will do
|
|
|
Post by smartiedarkblue on May 8, 2010 18:35:24 GMT 1
hi, i think the twin system bolts staight into the old frame, not to sure but he is including all brackets and fixings. i am upgrading to the twin lamps cause i think they will be better than the single. and they look better.
cheers ed
|
|
|
Post by rj2para (Bisto) on May 8, 2010 20:31:22 GMT 1
Thanks ed. Close up shots of your light project would be good please. While I agree the single light is less than good! With all the cables inside the single lamp it is normally an issue when the design is changed ie to twin lamps. (ie where to put all the cables ) An old car inner tube was the last solution posted. I and I suspect others would be interested to watch your progress if that is ok with you?
|
|
|
Post by smartiedarkblue on May 9, 2010 9:33:35 GMT 1
hiya all,
not a problem on the pics i shall post when i get on with the job, will hopefully recieve the bits the week starting 17th may, so i will get on it the following weekend. as i need the bike on the road for work during the week.
I am hoping to maybe be able to split the wiring loom between the two lamps so it remains hidden. but we shall see what happens.
I have adapted and fitted a HID system to my ntv, only to find on close inspection it is screwing up my reflector in the lamp, Its just not designed for the high intensity light emitted. So the light while brilliant is going to get worse over time. So i am changing to the twin to see what happens. I am also scouring for a set of small angel eyes lights to fit to the lower head stock mount, that i hope will sit under the front fairing and give better light for high beam use, as alot of my riding is at night on country back roads.
Anyway if you can send me a pm on how to attach pictures to the post i shall get it done.
cheers ed
|
|
|
Post by rj2para (Bisto) on May 9, 2010 9:52:01 GMT 1
|
|
|
Post by smartiedarkblue on May 9, 2010 17:50:06 GMT 1
Hi all,
Unfortunatly my front fairing and twin headlamp project has just died on its arse,
Got an email from breakers saying there had been an almighty thingy up and there had been 2 ed's after the same fairing and they thought it was the same bloke. but it now appears the other guy got there first.
Never mind will keep looking for another one.
cheers ed
|
|
|
Post by McF on May 9, 2010 18:34:42 GMT 1
That's a shame - sorry to hear this news
Good luck with the quest to find another
|
|
|
Post by rj2para (Bisto) on May 9, 2010 21:51:46 GMT 1
There is a whole bike on ebay with twins, post crash job, not sure what its going for.
|
|
|
Post by blitzman5 on May 17, 2010 1:04:56 GMT 1
HI all got the seat but the rack had been reserved so hunting again i found a rack new but old stock (made him an offer he could not refuse ha-ha)got that and got a front peg of local BIKE MOT station
|
|