|
Post by rj2para (Bisto) on Apr 16, 2009 12:15:50 GMT 1
---------------------------------------------------------------------------- Paul Mason Re: revere & ntv forks --------------------------------------------------------------------------------
hobbsie wrote:Im building a revere and have no forks as yet, i want to upgrade to twin discs on the front ive heard there are forks from a cb that will fit is that so? Welcome Hobbsie,
If you use Revere fork yokes remember that you will need longer fork stantions as the "clip on" style bars bolt on to the top of them above the top yoke.
Hope this helps a little
Paul -------------------------------------------------------------------------------- hobbsie Re: revere & ntv forks -------------------------------------------------------------------------------- Hi thanks for the response i already have forks from a 600fj circa1988 but they are 37mm and will not fit the 41mm yokes. I intend to use a ntv top yoke with old fashioned cut down norton straight bars as im an old wrinklie, perhaps mr Beatty can throw some light on what model forks to use. Link to Post - Back to Top Logged ----------------------------------------------------------------------------- hobbsie Re: revere & ntv forks -------------------------------------------------------------------------------- Hi its Hobbsie, well in the end i found the solution myself. Ive fitted deauville sliders on to the revere stantions, the ntv will fit also, and you can also use the revere yokes as well. So i now have the frame with the deauville front end with wheel and twin discs, that should slow me down.
|
|