|
Post by irishntv650 on May 8, 2013 0:11:33 GMT 1
anyone ever fit rear sets to an ntv? any pics and links to buying some would help,also what is the bolt hole gap measurements on the frame for the pegs? loads of universal ones out there so if i get the size then i can work from there
|
|
deedee
Bad ass biker
Posts: 338
|
Post by deedee on May 8, 2013 4:30:30 GMT 1
Had a recollection that the hangers weren't mirror imaged. But; I hadn't really realized how different they actually are.
I make the near side, Five & 3/4 of an inch (Steps in, One & 1/4 of an inch to the bottom) I make the off side, Four inch (Steps in, One inch to the bottom)
No images or links, but saw a neat job made with plates welded to the frame for mounting points.
|
|
|
Post by irishntv650 on May 8, 2013 13:44:18 GMT 1
i might just get some cbr ones and then just make up my own adapters and tap them out
|
|