|
|
ntv600
Jan 4, 2009 0:28:50 GMT 1
Post by me3mac on Jan 4, 2009 0:28:50 GMT 1
can any one tell me if a clock set off a ntv650 1995-6 will fit a ntv600 1992, i would be great full for a quick response to the question as i have a chance for a set of clocks
thank you
mal
|
|
|
|
ntv600
Jan 4, 2009 1:03:14 GMT 1
Post by Buzzin (^_^) on Jan 4, 2009 1:03:14 GMT 1
I can't be 100% sure, but I would think the speedo wouldn't be a problem (same system), but the revcounter I don't know...not sure how it is measured, and perhaps the timing of the 600 could be different to the 650....
Hopefully another member can help you there.
Buz
|
|
|
|
ntv600
Jan 4, 2009 10:49:53 GMT 1
Post by McF on Jan 4, 2009 10:49:53 GMT 1
The whole console will not fit I'm afraid, they are significantly different and their mountings are not compatible.
I am confident that you can remove the speedo from one and directly instal into the other physical size and gearing is the same), but the rev counters are not transferable.
Rev counters are physically different sizes (650 is the same size as speedo - 600 is approx 60% of the speedo size).
They're both electronic so I assume that they would work but in order to put 600 on 650 bike you would also need to change the top yoke, which in turn would mean new handlebars
Hope this makes sense, if not, let me know and I'll try to take photos
|
|
