Post by Jaz66 on Jan 18, 2009 5:32:37 GMT 1
Original post by Unknown
is anybody using parts off another bike on an ntv or revere
at moment im using a Hornet front caliper
handlebars are unknown
im just wondering which parts are usable on the ntv or revere
P.S standard fitting & not modified to fit
--------------------------------------------------------------------------
Original post by Franklin
Apparently the same fuel-pump can be found on the Africa-twin.
These pump are very often a problem.
The collegue advised me to replace it with a universal Mikuni pump:
Much cheaper and more reliable.
Added 22/03/09
I've just come back from the "Brezan" (which is a dutch chain of automotive shops), with a brand new universal fuel pump.
I searched the internet for a second-hand one & actually found one about an hours drive away.
They asked € 75 for it, but then it's still second hand & you don't know how long it will last.
So I thought I'll pay a visit to the local Brezan-shop & see if they can supply something.
Well they came up with a universal pump, which is only slightly larger than the original one. And it cost me about € 85 (brand new).
I entered the make & type etc. in google and found that some guy had used this exact pump as a replacement on his Varadero and had done already some 50.000 km with it. So not a bad pump.
The pump will fit into the cradle, but you have to make modifications to the tubes, because the diameters are different.
---------------------------------------------------------------------------
Original post by ilegalalien
clutch & brake levers
CB 125 TDJ / TDP SUPERDREAM 1983-89
VT 125 CX / CY SHADOW 1999-02
CD 250 UJ / UK 1988-92
CB 500 R -T 1993-96
NS400 RF-RG 1985-87
CBR600 FH-FJ 1987-88
NTV 600 J-M REVERE 1988-92
VT 600 SHADOW 1993-02
NTV 650 P-V 1993-97
CB 750 F2N-F2Y CB Seven fifty 1992-02
VF 750 CP-CV 1993-97
VT750 SHADOW 1997- 02
VTX1300 2003-06
------------------------------------------------------------------------------
Original post by ilegalalien
clutch friction plate set
Honda NTV 600 J/K/M Revere 88-92
Honda NT 650 Hawk GT 88-91
Honda NT 650 J/K Bros MkI (RC31) 88-92
Honda NT 650 L Bros MKll (RC31) PGM ignition 90-92
Honda NT 650 V2 Deauville 02
Honda NT 650 VW/VX/VY/V1 Deauville 98-01
Honda NTV 650 J/K/L/M/P/S/T/V 88-97
Honda XL 650 VY/V1/V2/V3/V4 Transalp 00-04
Honda XRV 650 J/K Africa Twin 88-89
Honda VT 750 CV/C2V/CW/C2W/CX/C2X/CY/C2Y/C21/C1 Shadow 97-02
Honda VT 750 DC1/DC2 Black Widow 01-02
-----------------------------------------------------------------------------
Original post by ilegalalien
bros 400 and hawk 650 use the same front wheel and a load of other bits,
on the 400 it's headlamp, front mudguard (also cb 500),
650 kinda the same but also the engine is the same except the chain drive,
Custom cans with a 2 into 1 from both will fit (same 38mm pipe)
NTV Dullville is the same engine (650) only difference is the rocker cover extra breathing hole
rectifiers are the same on a lot of old hondas
footrests are all over the honda bikes..
more to come........
----------------------------------------------------------------------------
Original post by everydaybiker
Have seen various VFR bits appearing on NTVs, e.g. front forks / wheel / twin disc set up, even a fairing from the pre -1990 version (pre ProArm) which was fitted to a red NTV being sold on Ebay only this week (shame I just deleted the item earlier today as the auction's finished now).
-------------------------------------------------------------------------
is anybody using parts off another bike on an ntv or revere
at moment im using a Hornet front caliper
handlebars are unknown
im just wondering which parts are usable on the ntv or revere
P.S standard fitting & not modified to fit
--------------------------------------------------------------------------
Original post by Franklin
Apparently the same fuel-pump can be found on the Africa-twin.
These pump are very often a problem.
The collegue advised me to replace it with a universal Mikuni pump:
Much cheaper and more reliable.
Added 22/03/09
I've just come back from the "Brezan" (which is a dutch chain of automotive shops), with a brand new universal fuel pump.
I searched the internet for a second-hand one & actually found one about an hours drive away.
They asked € 75 for it, but then it's still second hand & you don't know how long it will last.
So I thought I'll pay a visit to the local Brezan-shop & see if they can supply something.
Well they came up with a universal pump, which is only slightly larger than the original one. And it cost me about € 85 (brand new).
I entered the make & type etc. in google and found that some guy had used this exact pump as a replacement on his Varadero and had done already some 50.000 km with it. So not a bad pump.
The pump will fit into the cradle, but you have to make modifications to the tubes, because the diameters are different.
---------------------------------------------------------------------------
Original post by ilegalalien
clutch & brake levers
CB 125 TDJ / TDP SUPERDREAM 1983-89
VT 125 CX / CY SHADOW 1999-02
CD 250 UJ / UK 1988-92
CB 500 R -T 1993-96
NS400 RF-RG 1985-87
CBR600 FH-FJ 1987-88
NTV 600 J-M REVERE 1988-92
VT 600 SHADOW 1993-02
NTV 650 P-V 1993-97
CB 750 F2N-F2Y CB Seven fifty 1992-02
VF 750 CP-CV 1993-97
VT750 SHADOW 1997- 02
VTX1300 2003-06
------------------------------------------------------------------------------
Original post by ilegalalien
clutch friction plate set
Honda NTV 600 J/K/M Revere 88-92
Honda NT 650 Hawk GT 88-91
Honda NT 650 J/K Bros MkI (RC31) 88-92
Honda NT 650 L Bros MKll (RC31) PGM ignition 90-92
Honda NT 650 V2 Deauville 02
Honda NT 650 VW/VX/VY/V1 Deauville 98-01
Honda NTV 650 J/K/L/M/P/S/T/V 88-97
Honda XL 650 VY/V1/V2/V3/V4 Transalp 00-04
Honda XRV 650 J/K Africa Twin 88-89
Honda VT 750 CV/C2V/CW/C2W/CX/C2X/CY/C2Y/C21/C1 Shadow 97-02
Honda VT 750 DC1/DC2 Black Widow 01-02
-----------------------------------------------------------------------------
Original post by ilegalalien
bros 400 and hawk 650 use the same front wheel and a load of other bits,
on the 400 it's headlamp, front mudguard (also cb 500),
650 kinda the same but also the engine is the same except the chain drive,
Custom cans with a 2 into 1 from both will fit (same 38mm pipe)
NTV Dullville is the same engine (650) only difference is the rocker cover extra breathing hole
rectifiers are the same on a lot of old hondas
footrests are all over the honda bikes..
more to come........
----------------------------------------------------------------------------
Original post by everydaybiker
Have seen various VFR bits appearing on NTVs, e.g. front forks / wheel / twin disc set up, even a fairing from the pre -1990 version (pre ProArm) which was fitted to a red NTV being sold on Ebay only this week (shame I just deleted the item earlier today as the auction's finished now).
-------------------------------------------------------------------------
