|
|
Post by 69falcon on Apr 30, 2017 3:29:03 GMT 1
Hello all, I'm actually an NT650 Hawk GT owner, although I've heavily modified my bike, including adding a Revere fuel tank. I was lucky enough to get a new fuel tap back when they were still available, but I see that they no longer are. I've picked up additional Revere tanks for other bike builds, but am in need of two fuel taps. Is there a common alternative, perhaps from a CBR600 or some other bike? Here's my bird:  |
|
seastate
A-Road rider Limited to 70
Posts: 74
|
Post by seastate on Apr 30, 2017 9:57:47 GMT 1
Not sure really - ebay might be an option
|
|
micawber
All Weather Rider, well hard
No longer lurking in the shrubbery.
Posts: 151
|
Post by micawber on May 13, 2017 17:20:11 GMT 1
Hi 69falcon
Do you need a complete tap, or a seal kit? If a tap complete, breakers on ebay might be the solution though you need to be wary about the condition. David Silver sometimes have deals on old stock as they buy up dealers' spares from various places.
If you just need a seal kit, ebay again, or Wemoto or similar may do them.
Sadly part numbers for the same item tend to be different when fitted to different models. There is no database that I know of that cross references them. If you measure the thread size and depth you might be able to fit a universal tap.
I would think that magazines such as "Classic Bikes" or "Back Street Heroes" or similar have websites but there must be plenty of adverts in them to give you a lead.
Hope these suggestions help.
Micawber.
|
|
|
|
Post by gilbertplantpot on Sept 30, 2017 14:28:23 GMT 1
|
|
