fatal
Ahh! Just passed their bike test
Posts: 44
|
Post by fatal on Jun 11, 2015 19:35:24 GMT 1
Hi all, the front brake caliper mounting bracket on my 1994, 650 ntv has snapped, looking for replacement on eBay, but not many around, is the same front brake caliper used on other models, to help widen my search
|
|
ssray
All Weather Rider, well hard
Posts: 158
|
Post by ssray on Jun 12, 2015 12:59:50 GMT 1
The caliper is the same on many models, but the hanger is not, you could use a brembo 4 pot and make a new hanger?
|
|
brendan0
Rides on the Motorways
Posts: 86
|
Post by brendan0 on Jun 17, 2015 22:57:39 GMT 1
Just a thought... I wonder if hanger is often included in sale of caliper or fork, as it's a fairly minor part? Might be as cheap to buy used hanger plus caliper, or maybe seller will split?
Good luck!
B
|
|
fatal
Ahh! Just passed their bike test
Posts: 44
|
Post by fatal on Jun 18, 2015 20:54:54 GMT 1
Thanks SSRAY you have inspired me to go the 4 pot route, I just happen to have a spare 4 pot brembo off my Ducati Monster, adaptor plate nearly finished. I will post photo,s when done
|
|
fatal
Ahh! Just passed their bike test
Posts: 44
|
Post by fatal on Jun 18, 2015 21:13:21 GMT 1
|
|
fatal
Ahh! Just passed their bike test
Posts: 44
|
Post by fatal on Jun 18, 2015 21:15:45 GMT 1
Rear milled out 4mm to centre caliper to disk
|
|
fatal
Ahh! Just passed their bike test
Posts: 44
|
Post by fatal on Jun 20, 2015 21:19:51 GMT 1
Caliper mounted
|
|
fatal
Ahh! Just passed their bike test
Posts: 44
|
Post by fatal on Jun 20, 2015 21:22:44 GMT 1
Ducati Monster 600 master cylinder to match caliper installed, just the brake hose to sort out
|
|