undercover
All Weather Rider, well hard
Posts: 186 
|
Post by undercover on Oct 11, 2013 15:49:00 GMT 1
replacing the seals on the water hose's the ones that fit on the cylinder head cover
the old seals had rotted and i had to pick them out frome insde the cylinder head housing
now to replace seals do they go onto the waterhose pipe or down into the holes in the cylinder head cover
|
|
deedee
Bad ass biker
Posts: 338
|
Post by deedee on Oct 12, 2013 10:35:00 GMT 1
 Hope this helps... |
|
undercover
All Weather Rider, well hard
Posts: 186
|
Post by undercover on Oct 12, 2013 17:26:35 GMT 1
thats the radiator not the water pipes that fit to the cyinder head cover
|
|
deedee
Bad ass biker
Posts: 338
|
Post by deedee on Oct 12, 2013 21:04:15 GMT 1
Hi Undercover,
my apologies; Misinterpretated your query & fixated on water hose & pipe.
I believe you refer to the O-ring under the spigot bolted onto the cylinder?
If so: - I'd fit the O-ring onto the spigot before bolting back into the cylinder.
Ensuring it seats properly. (I'd also use an appropriate sealant in the joint.)
Hoping this helps...
|
|
