alexdk
Restricted to 33BHP
Best regards Alex (the Dane)
Posts: 51
|
Post by alexdk on Apr 17, 2013 20:57:15 GMT 1
Hi All, Im currently restoring my NTV and have run into a small problem (I simply cant remember ) There are two hoses from my expansion container.. As I recall.. One of the hoses from the expansion container goes to a small connectionpoint just underneath the lid for the coolant and the other hose from the expansion container is directed down in front of the rear tire (drain).. But when looking at the above picture which hose goes to the coolant connectionpoint ? and whist hose is the drain-hose ?? Best regards Alex
|
|
gills
Bad ass biker
Posts: 262
|
Post by gills on Apr 17, 2013 22:08:38 GMT 1
Top hose (on the right of your photo) is the overflow, which goes down past the swing arm and the bottom hose goes up to the thermostat housing. Hope that helps.
|
|
alexdk
Restricted to 33BHP
Best regards Alex (the Dane)
Posts: 51
|
Post by alexdk on Apr 17, 2013 22:16:23 GMT 1
Gills: thats super... thanks for the answer and the helping hand :-)
|
|
gills
Bad ass biker
Posts: 262
|
Post by gills on Apr 18, 2013 10:30:55 GMT 1
Your welcome. Looking forward to seeing it fully rebuilt and back on the road
|
|