|
Post by prodrive005 on Apr 1, 2013 21:30:15 GMT 1
the connector for my starter solanoids been cut off and wired individually for som reason..anyway need to know how they go in has anyone got a pick or diagram to show where trhey go?...is the 4 block connector behind the fuse has a red and a red and white and 2 others I cant remember off hand cheers
|
|
slug
Bad ass biker
biker from welsh borders on a budget***
Posts: 235
|
Post by slug on Apr 2, 2013 11:54:20 GMT 1
hi prodrive. if you look on threads thatsawkward has listed some wiring diagrams under wiring set up, page 19 gives set up. red is from ignition switch via fuse. red/white goes to regulator. yellow/red goes to starter button. green/red goes to clutch cut out switch. best to check out wiring set up page,. cheers the slug. (summers coming)..
|
|
|
Post by rj2para (Bisto) on Apr 2, 2013 13:21:35 GMT 1
|
|
|
Post by prodrive005 on Apr 2, 2013 14:30:36 GMT 1
cheers mate think I sussed it...used screwdriver across terminals on starter relay and it turned...got power to starter button and back to relay wen starter pressed but nothing to starter itself..new relay needed I think no continuity from any terminals to starter side of the relay
|
|
slug
Bad ass biker
biker from welsh borders on a budget***
Posts: 235
|
Post by slug on Apr 2, 2013 18:02:48 GMT 1
hi prodrive, as you say may be starter relay. also could be clutch stand ,or stand switch not making circuit back. try a direct feed to starter relay with fuse. and return to earth. cheers slug
|
|
|
Post by prodrive005 on Apr 9, 2013 18:38:23 GMT 1
green an white wire for clutch safety switch had a break n it so wasn't makin the connection back to relay at the green and red wire lol...nearly had a match to it earlier lol...got there tho
|
|
slug
Bad ass biker
biker from welsh borders on a budget***
Posts: 235
|
Post by slug on Apr 10, 2013 7:44:31 GMT 1
great a least its sorted. some wiring problems can be awkward to find.. cheers the slug
|
|