|
Post by nomis1981 on Oct 27, 2010 17:42:05 GMT 1
Hi Can any one tell me / show me (photo) the correct routing for the rear seat lock cable. I have the key part attached to the rear mudguard area (below stop light) the lock mechanism itself is bolted on correctly where it should be. I just dont recall the route of the cable itself. Please help
|
|
|
Post by rj2para (Bisto) on Oct 27, 2010 22:21:15 GMT 1
I will try and get you some pictures tomorrow.
|
|
|
Post by nomis1981 on Oct 28, 2010 9:14:45 GMT 1
Would be great if you could.
Look forward to seeing the pic
Thanks
|
|
|
Post by rj2para (Bisto) on Oct 28, 2010 13:37:11 GMT 1
I have just had the seat off my Revere, but without removing the rear plastics I can see much of the cable.
Looking from the back of the bike the cable comes from the lock towards the right hand side of the bike (exhaust side) and the curves towards the back towards the lock.
I would not have thought the cable was that long? i.e. it would tend find it's own route.
Sorry but I would rather not remove my plastics as they are old, and the mountings are tired. I do have a spare set but they need spraying to match. Hope this helps.
Does anybody else have any stripped down pics?
|
|
|
Post by rj2para (Bisto) on Oct 28, 2010 14:50:07 GMT 1
|
|
|
Post by McF on Oct 28, 2010 21:55:01 GMT 1
Does anybody else have any stripped down pics? Be careful what you're asking for ;D
|
|
|
Post by rj2para (Bisto) on Oct 28, 2010 22:09:10 GMT 1
Hole in one. I love it when a plan comes together. Even a simple one. lol I thought you or Jaz would take the bait.
|
|
|
Post by McF on Oct 31, 2010 11:47:58 GMT 1
Nice work RJ (even if it was BozBoz' bike ;D)
I hoped this helped you Nomis - perhaps you might like to sign up for membership of the Forum - it's "Yorkshire and Scottish Friendly" (meaning it's free). You could share news of your aNTy's progress and join in the fun merriment and banter
|
|